How to Care for Paint Protection of Car with Ceramic Coating

This article is for you if you are about to get a premium ceramic layer or still carrying out an analysis to decide if this option is best for your ability and participation.

It can be a long process to choose the correct ceramic coating to cover the layer during your ride. However, being proactive in preparation for your trip is a great way to ensure successful application and years of superior paint protection once the right methods has been found. This article clearly  explains how the Paint Protection Car can be cared with ceramic coating.

After a recommended method for preparing your car to install a new ceramic coating by properly washing the car, you can achieve the best return on your investments by removing chemical, wax, and unnecessary debris from the floor.

The better the planning, the more likely quality outcomes will be obtained if there is a statement of fact for all painting enhancement items.

We will describe our Ceramic Coating Preparation Guide for Paint Protection of Car in the following paragraphs and some additional tips to enable your new DIY ceramic coating to adhere to a transparent cover of the paint and to create elegant shine and protect your vehicle’s surface for many years.

paint-protection-car

Step 1: Wash

Start by washing your vehicle properly. A wax-free and dull soap like Clean Slate is recommended. The pure slate doesn’t just contain wax, other sealants, waxes or enamels are also excluded. The ceramic coating will adhere properly to your paint only after the surface is free of debris. If left on the surface, the residue is used to avoid heavy adhesion and good sticking between its ceramic coating and the paint.

Step 2: Clay

Once the surface is clean, the paint should be covered with clay to prevent any contamination of the surface, which can not be removed. If not properly removed, waste will be trapped for years under its ceramic layer! When left unchecked, the paintwork may be infected and damaged irreversibly.

Step 3: Polish

It may be important to polish your vehicle even when it is new, and paint correction may be required. To fix imperfections, it is important to polish the paint and to bring the perfect finish because after using the ceramic layer, scratch and twist are trapped under the coating without the ceramic layer being removed. No one wants a monstrosity semi-permanent!

Step 4: Clean

The final step before starting the coating cycle is to clean up oils, waxes or silicone’s still in the surface with a body cloth, once the surface has been properly washed, cleaned. Wiping Out is recommended for cleaning the surface, which eliminates residual and lingering waxes, sealants, or enamels. To achieve the best possible results, use a clean, lint-free towel. Now that the surface is perfectly smooth and free of contaminants, the ceramic coating is ready to be applied!

Why should your Car be Checked Before you Apply a Ceramic Coating?

A ceramic coating is a product that penetrates your vehicle’s transparent layer. The product adheres better when the coast is clear, free from debris, contaminants as well as the other “thing.” This is the main reason why it is so important to prepare the vehicle before installation.

technical-reasons-car-paint-protection

Some Technical Reasons for Car Paint Protection also given below:

The surface is straighter:

A transparent layer is not a perfectly smooth surface. Actually, I would see peaks and valleys if you use a microscope into its transparent surface. The ceramic coating can fill these ‘less smooth’ surfaces and provide a flatter surface by applying a clay bar and additional materials to remove these microscopic contaminants.

Provides a stronger Nano-molecular link:

The ceramic coating is a protective microscope, as thin as a human hair by removing small particles information from the surface of the car. You will be provided by a cleaning cloth to create a stronger molecular bond between the concrete and transparent layer.

Improves to glim:

Ceramic coatings create a gleaming light by hardening to 9 hours and making an incredibly hard glass thin layer. If the surface is clean, the visibility will be increased without swirling and polishing lines.

Preparation Guide For Ceramic Coating

Take two buckets:

We suggest to follow the 2 bucket wash technique, so make sure that you have (2) clean buckets ready. Stay away if you take positive results seriously from an automated car wash.

Use Automotive Shampoo:

You’re going to buy an appropriate shampoo for high-quality cars to wash it. Do not use additional waxes or polishes on any product. In a 1 oz to 4 gallons water ratio, blend the shampoo. It can also be used during the third preparation phase as a lubricant for super-slippery clay plates.

An extra luxurious microfiber:

You need to check for a dense spun, which will minimize scratching and whirl traces, impregnating your automotive paints.

Clay glove:

This is a more recent product that facilitates the processing of bars of clay.

Isopropyl alcohol (IPA) for panel:

The last step in the ceramic coating preparation process is to sprinkle and clean each panel with an isopropyl alcohol solution.

Microfiber cloth:

To dry, polish, and clean IPA, you need several towels for microfiber processing. Always use clean and fresh towels to protect against contamination at each stage. Even before adding the right things, you don’t want water spots.

Polishing paste without wax:

You want to paint the surface without wax after washing and clay processes. Always use car care goods of high quality.